A Three-Dimensional Water Quality Model of Chicago Area Waterway System (CAWS)

As outfalls from various water reclamation plants, pumping stations, and combined sewer overflow outfalls discharge into the Chicago Area Waterway System (CAWS), an enhanced understanding of the final fate of crucial water quality state variables is of utmost importance. This paper reports the development and application of a 3D water quality model for a modified CAWS combined with the hydrodynamic kernel of Environmental Fluid Dynamics Code (EFDC). The modified CAWS is used to demonstrate the usefulness of the model while eliminating complications beyond the scope of this initial effort. The water quality model developed and presented in this research is a simplistic dissolved oxygen (DO)—biochemical oxygen demand model with the facility to account for the interaction between the water column and the bed. The aforementioned model is applied for the month of May 2009. The results from the hydrodynamic (EFDC) and water quality model is validated with the help of the observed data obtained from United States Geological Survey gaging stations and Metropolitan Water Reclamation District of Greater Chicago monitoring stations present inside the modeled domain. The 3D modeling captured the hydrodynamic and water-quality processes in CAWS in a satisfactory manner. Furthermore, modeling results showed and proved the interdependence of water quality characteristics in Bubbly Creek and CAWS with the effluent concentration from Racine Avenue Pumping Station situated at the head of Bubbly Creek, South Fork of South Branch of Chicago River.     

Degradation of 1,4-dioxane using advanced oxidation processes

Introduction  

In the nuclear industry 1,4-dioxane is used as a solvent in liquid scintillation technique for measuring low-energy beta-emitters such as ³H or C¹⁴ in aqueous media. Improper disposal of 1,4-dioxane can contaminate the ground and surface waters. Conventional wastewater treatment processes like chemical treatment, air stripping, carbon adsorption, and biological treatment are ineffective for the degradation of 1,4-dioxane.     

Social entrepreneurship,co-production,and post-disaster recovery

Post-disaster recovery requires co-production; that is, the inputs of citizens are essential for successful community recovery to occur. Citizens contribute to post-disaster recovery by volunteering, taking on consultative and decision-making roles within their communities, and directly participating in post-disaster reconstruction efforts. Without meaning ful contributions from citizens—the intended beneficiaries—unilateral efforts by public officials and authorities will inevitably fail. This study shows that social entrepreneurs can thus play a critical role in spurring post-disaster recovery by facilitating co-production. It focuses on the role of social entrepreneurs after disasters and centres on one rural village, Giranchaur Namuna Basti in the Sindhupalchowk District of Nepal. Specifically, the study uses the case of the Dhurmus Suntali Foundation's Namuna village project in Giranchaur following the 7.8-magnitude earthquake that struck on 25 April 2015 to examine the pivotal role that social entrepreneurs assume in promoting voluntary activities, community engagement, and participation in post-disaster recovery efforts.     

Adsorptive removal of toxic azo dye Amido Black 10B by hen feather

Purpose and aim

Amido Black 10B is an azo dye with very high toxicity. It is now established that the dye damages the reparatory system of humans and also causes skin and eye irritations. It is therefore considered worthwhile to develop a systematic procedure to eradicate Amido Black 10B from its aqueous solution using a waste material as adsorbent. Therefore, adsorption of the dye is achieved using hen feathers as adsorbent.

Materials and methods

Before using hen feather as adsorbent material, it is washed, cut into small pieces and activated using hydrogen peroxide. Detailed chemical and physical analysis of hen feather was also carried out by known analytical techniques. The adsorptive removal of the dye was made through batch experiments in 100 mL airtight flasks. The experiment is divided in three major categories, the preliminary investigations, adsorption isotherm measurements, and kinetic studies.

Results

Under preliminary investigations, the effect of pH, temperature, concentration of dye, and amount of adsorbent were carried out. It was found that with increase in pH, the adsorption of Amido Black 10B decreases; while with increasing the amount of hen feather, it increases. The isothermal studies indicate that the ongoing adsorption process is endothermic in nature and obeys Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevitch (D–R) adsorption isotherm models. The Gibb’s free energy and entropy of the adsorption were also calculated. The D–R isotherm model verified the involvement of chemisorption during the adsorption. The kinetic measurements indicate operation of pseudo second order process during the adsorption and dominance of film diffusion mechanism at all the temperatures.

Conclusions

The developed method is highly efficient and ecofriendly. It also ascertains a necessitous utilization of waste material hen feather for the benefit of the society.     

Management of mine spoil for crop productivity with lignite fly ash and biological amendments

Long-term field trials using lignite fly ash (LFA) were carried out in rice crops during the period 1996-2000 at Mine I, Neyveli Lignite Corporation, Tamil Nadu. LFA, being alkaline and endowed with an excellent pozzolanic nature, silt loam texture, and plant nutrients, has the potential to improve the texture, fertility, and crop productivity of mine spoil. The rice crops were the first, third, fifth, and sixth crops in rotation. The other crops, such as green gram (second) and sun hemp (fourth), were grown as green manure. For experimental trials, LFA was applied at various dosages (0, 5, 10, 20, 50, 100, and 200 t/ha), with and without press mud (10 t/ha), before cultivation of the first crop. Repeat applications of LFA were made at the same dosages in treatments of up to 50 t/ha (with and without press mud) before cultivation of the third and fifth crops. Press mud, a lightweight organic waste product from the sugar industry, was used as an organic amendment and source of plant nutrients. Also, a recommended dosage of chemical fertilizer, along with gypsum, humic acid, and biofertilizer as supplementing agents, was applied in all the treatments, including control. With one-time and repeat applications of LFA, from 5 to 20 t/ha (with and without press mud), the crop yield (grain and straw) increased significantly (p < 0.05), in the range from 3.0 to 42.0% over the corresponding control. The maximum yield was obtained with repeat applications of 20 t/ha of LFA with press mud in the third crop. The press mud enhanced the yield in the range of 1.5-10.2% with various dosages of LFA. The optimum dosage of LFA was 20 t/ha for both one-time and repeat applications. Repeat applications of LFA at lower dosages of up to 20 t/ha were more effective in increasing the yield than the corresponding one-time applications of up to 20 t/ha and repeat applications at 50 t/ha. One-time and repeat applications of LFA of up to 20 t/ha (with and without press mud), apart from increasing the yield, evinced improvement in the texture and fertility of mine spoil and the nutrient content of crop produce. Furthermore, some increase in the content of trace and heavy metals and the level of gamma-emitters in the mine spoil and crop produce was observed, but well within the permissible limits. The residual effect of LFA on succeeding crops was also encouraging in terms of eco-friendliness. Beyond 20 t/ha of LFA, the crop yield decreased significantly (p < 0.05), as a result of the formation of hardpan in the mine spoil and possibly the higher concentration of soluble salts in the LFA. However, the adverse effects of soluble salts were annulled progressively during the cultivation of succeeding crops. A plausible mechanism for the improved fertility of mine spoil and the carryover or uptake of toxic trace and heavy metals and gamma-emitters in mine spoil and crop produce is also discussed.     

Chemical fractionation and heavy metal accumulation in the plant of Sesamum indicum (L.) var. T55 grown on soil amended with tannery sludge: Selection of single extractants

A pot experiment was carried out to study the single and sequential extractions of metals in different tannery sludge amendment and the potential of the plant of Sesamum indicum L. var. T55 (sesame) for the removal of metals from tannery waste contaminated site. The metal extraction efficiency obtained with each extractants was slightly different and follow the order; EDTA>DTPA>NH(4)NO(3)>NaNO(3)>CaCl(2). The correlation analysis between extractable metals in the different amendments of sludge and metal accumulation in the plant (lower and upper parts) showed better correlation for most of the tested metals with EDTA extraction. In this study, a sequential extraction technique was applied on different amendments of tannery sludge. The results showed that Mn, Zn, Cr and Cd were mostly associated with Fe-Mn oxide fraction in most of the amendments, K and Ni was found in residual (RES) fraction, Fe and Cu was bound with organic matter (OM) and RES fractions and Na was associated with carbonate (CAR) fraction. The metal accumulation after 60 d of growth of the plant was found in the order of K>Na>Fe>Zn>Cr>Mn>Cu>Pb>Ni>Cd and its translocation was found less in upper part. The accumulation of toxic metals (Cr, Ni and Cd) in the plants was found to increase with increase in sludge ratio, in contrast, the accumulation of Pb decreased. In view of growth parameters and metal accumulation in the plant, it was observed that lower amendments (25%) of tannery sludge were found suitable for the phytoremediation of most of the studied metals.     

Alteration in uptake and translocation of essential nutrients in cabbage by excess lead

To observe the tolerance limit of lead phytotoxicity in cabbage (Brassica oleracea L.) var. Golden Aker plants were grown in refined sand with complete nutrient solution for 41 days. On 42nd day, pots with plants were separated into six lots. One lot was allowed to grow as such and was treated as control, in rest of the five lots, lead was applied at 0.1, 0.2, 0.4, 0.5 and 1.0 mM as lead nitrate. At d 75 (34 days after metal exposure), the lead toxicity symptoms as restricted growth was observed on plants at 1.0 mM lead supply. Excess lead (0.5 and 1.0 mM) developed interveinal chlorosis along the margins of young leaves. The affected leaves were reduced in size giving plant a rosette like appearance. Head size was markedly reduced at these (0.5 and 1.0 mM) levels of lead. At 0.5 mM the intensity of symptoms was markedly low. With an increase in lead supply, the concentration of lead and zinc was increased whereas that of P, S, Fe, Mn and Cu were decreased in various parts of cabbage. At 1.0 mM Pb, the concentration of lead was highest in roots and lowest in head. In leaves of cabbage the threshold of toxicity and toxicity values were 150 and 320 microg g-1 dry matter, respectively.     

The effects of tourism and globalization over environmental degradation in developed countries

Environmental Science and Pollution Research - This paper focuses on long-term evidence on economic growth, international tourism, globalization, energy consumption and carbon dioxide (CO2)...     

Translocation of metals and its effects in the tomato plants grown on various amendments of tannery waste: evidence for involvement of antioxidants

A field experiment was conducted to study the effect of different amendments of tannery sludge on physiological and biochemical parameters of tomato plant (Lycopersicon esculentum L. Mill). The accumulation of metals (Cr, Fe) in different parts of tomato plants grown on tannery sludge amended soil increased in a concentration and duration-dependent manner. The accumulation of both the metals was found lowest in the fruits of the plant. The statistical analysis of the results showed an increase in chlorophyll and protein contents in lower sludge amendment ratio at all exposures followed by a decrease at highest (100%) sludge amendment ratio. Lipid peroxidation enhanced in both root and leaves of sludge grown plants of tomato at all the sludge amendments and exposure periods, which is evidenced by increased malondialdehyde content, however the maximum increase was found in the roots (43.63%) and leaves (56.66%) of the plant grown on 100% tannery sludge at 60 d, over respective controls. The level of antioxidants, cysteine, non-protein thiol and ascorbic acid increased in the sludge grown plants of tomato to cope up with stress induced by the excess amount of the heavy metals present in the tannery sludge. The maximum increase was found in cysteine content (75.53% in the leaves), non-protein thiol content (92.68% in the roots) and ascorbic acid content (29.66% in the roots) of the plant at 75% tannery sludge after 30 d. The tomato plants were found well adopted for minimizing damage induced by reactive oxygen species, when grown on tannery sludge amendments in the present study.